Description

All in one flashing signal solution 

Note: If bracket is required please enquire.

Special Feature: The top and bottom rows of LED’s can be
set to flash alternately or simultaneously with the middle row.

• 11mm High
• Wide 150 Degree Vision
• IP67 Waterproof
• Synchronization Wire
• Voltage: 12-24V
• Current: 1.5A
• 22 Flash Patterns
• Lens Material : PC
• Base Material : Aluminum
• Size : 90 x 67 x 11mm
• Weight: 86g

Wire Functions

Red: To +VDC (fuse @ 3A)
Black: To Chassis Ground
Yellow: Pattern Selector
White: Synchronisation

Flash Pattern Selection & Synchronisation

• To select flash pattern apply Yellow to Red wire
• Less than 1 second for next pattern
• Between 1 to 3 seconds for previouse pattern
• More than 5 seconds to turn off
• Connect Yellow wires of all flashers together for synchronisation

High / Low Power

• To adjust illumination output from 100% to 50% brightness connect White to Black wire

Flash Patterns

• Alternating Quad Burst T/B(SYN)
• Alternating Quad Burst B/T(SYN)
• Simultaneous Quad Burst(SYN) – phase 1
• Simultaneous Quad Burst (SYN)- phase 2
• Single Alternating T/B(SYN)
• Single Alternating B/T(SYN)
• Single Simultaneous(SYN) – phase 1
• Single Simultaneous (SYN) – phase 2
• Double Alternating T/B(SYN)
• Double Alternating B/T(SYN)
• Double Simultaneous(SYN) -phase 1
• Double Simultaneous(SYN)- phase 2
• Quad Alternating T/B(SYN)
• Quad Alternating B/T(SYN)
• Quad Simultaneous(SYN) – phase 1
• Quad Simultaneous(SYN) – phase 2
• Alternating Rapid Pluse W-Variable Rate
• Simultaneous Rapid Pluse W-Variable Rate
• Cycle Flash
• Half Steady & Half Single
• Steady
• Off